/
November 10-11, 2021, Shymkent, Kazakhstan
VIII International Annual Conference
"Industrial Technologies and Engineering" (ICITE 2021)
(Application acceptance is over)
"Industrial Technologies and Engineering" (ICITE 2021)
(Application acceptance is over)
Materials based on the conference results will be published by AIP publishing
in AIP Conference proceedings ISSN: 1551-7616 and aimed indexed to
scientometric databases Scopus and Web of Science
in AIP Conference proceedings ISSN: 1551-7616 and aimed indexed to
scientometric databases Scopus and Web of Science
Days
Hours
Minutes
Seconds
November 10-11, 2021, Shymkent, Kazakhstan
VIII International Annual Conference
"Industrial Technologies and Engineering" (ICITE 2021)
(Application acceptance is over)
"Industrial Technologies and Engineering" (ICITE 2021)
(Application acceptance is over)
Materials based on the conference results will be published by AIP publishing
in AIP Conference proceedings ISSN: 1551-7616 and aimed indexed to
scientometric databases Scopus and Web of Science
in AIP Conference proceedings ISSN: 1551-7616 and aimed indexed to
scientometric databases Scopus and Web of Science
Days
Hours
Minutes
Seconds
We are proud to announce that the International Conference of Industrial Technologies and Engineering will be held at the South Kazakhstan University named after M. Auezov. It was first held in 1998 at the M. Auezov SSU in Shymkent, Kazakhstan.
1. Science and technology in the extraction and processing of mineral raw materials.
1.1 Oil and gas engineering: exploration, production and processing
1.2 Chemistry and technology of polymer composite materials
1.3 Chemical technology of inorganic substances, silicate materials and metallurgy
2. Actual problems of engineering and technology development.
2.1 Agro-industrial complex and agribusiness
2.2 Food engineering in the context of food security in Kazakhstan
2.3 Renewable energy sources and energy-saving technologies
1.1 Oil and gas engineering: exploration, production and processing
1.2 Chemistry and technology of polymer composite materials
1.3 Chemical technology of inorganic substances, silicate materials and metallurgy
2. Actual problems of engineering and technology development.
2.1 Agro-industrial complex and agribusiness
2.2 Food engineering in the context of food security in Kazakhstan
2.3 Renewable energy sources and energy-saving technologies
About conference
Call for papers:
The purpose of the conference:
Discussion of research results in the field of chemical engineering, nano-and biotechnologies, ecology and rational use of natural resources, renewable energy sources and energy-saving technologies,
information technologies and issues of engineering education development.
information technologies and issues of engineering education development.
The conference, focused on engineering topics and their application in industry and manufacture, will be held once a year at the M. Auezov SKU.
In February 2015, selected papers of the conference were submitted for inclusion in the Scopus database
(reg No.CE56A4AF25CBD4FA).
Professors and teachers, scientists of higher educational institutions and research institutes of the Republic of Kazakhstan and foreign countries, who have significant results of scientific research on the conference topic, are invited to participate in the conference.
In February 2015, selected papers of the conference were submitted for inclusion in the Scopus database
(reg No.CE56A4AF25CBD4FA).
Professors and teachers, scientists of higher educational institutions and research institutes of the Republic of Kazakhstan and foreign countries, who have significant results of scientific research on the conference topic, are invited to participate in the conference.
Organization committees
Organization committees
1. Science and technology in mining and processing
- Marzband Mousa, University of Northumbria, Newcastle, United Kingdom
- Maria Ciurea, University of Petroșani, Petroșani, Romania
- Ştefan Ţălu, Assoc. Prof. PhD., The Technical University of Cluj-Napoca, Romania
- Y. Nifontov, Dr.Eng.Sc., Professor, Scientific Research Laboratory for Electromagnetic Safety, Russia, St. Petersburg
- R.S. Abiev, Dr.Eng.Sc., Professor, St. Petersburg State Technical University, Russia
- G.F. Michot, PhD, Professor, University of Lorraine, France
- V. K. Bishimbayev M., Dr.Eng.Sc., Professor, Academician of NAS, Auezov. SKSU, Kazakhstan
- E.S.M. Negim, Dr. PhD, Faculty of Science and Engineering, University of Wolverhampton, Wolverhampton, WV1 1LY, United Kingdom
- O. Ivakhnenko, Dr. PhD, Heriot-Watt University, prof. of department Petroleum Engineering, Great Britain.
- I. Petropavlovsky, Dr.Eng.Sc., Professor, D.I.Mendeleyev Russian Chemical and Technological University, Moscow, Russian Federation.
- V. Malyshev, Dr.Eng.Sc., Professor, Zh.Abishev Chemical and Metallurgical Institute, Karaganda, Kazakhstan
- G. Kagramanov, Dr.Chem.Sc., Professor, D.I.Mendeleyev Russian Chemical – Technological University, Moscow, Russian Federation.
- V.P. Meshalkin, Dr.Eng.Sc., Professor, D. Mendeleyev University of Chemical Technology of Russia Russia.
2. Computer Sciences and Information Technologies
- Nazarov Dmitry, Ural State University of Economics, Yekaterinburg, Russia (link: Scopus profile)
- А.М. Brener, Dr.Eng.Sc., Professor, M. Auezov SKSU, Kazakhstan
- V. M. Tyutyunnik, Dr.Eng.Sc., Professor, President of the international information Nobel center (IINC), Russia
3. Ecology and nature management
- M. Nursoy, Dr., Professor, Istanbul Gelisim University, Turkey.
- M.I. Satayev, Dr.Eng.Sc., Professor, Corresponding Member of NAS, M. Auezov SKSU, Kazakhstan
4. Renewable energy and energy saving technologies
- E. Kenig, Dr., Professor, University of Paderborn, Germany.
- R. Abiev, Dr.Eng.Sc. St.Peterburg State Technological Institute (Technical University), Russian Federation.
- S.V. Gribkov, Can.Eng.Sc., Ph.D., Associate Professor, Corresponding Member of RIA, Science and Engineering Center "VINDEK", Russia
5. Nano-, bio and green technologies for a sustainable future
- M. Baklanov, Dr., Inter University Research Centre of Microelectronics and Nanotechnologies (IMEC), Leven, Belgium.
- N. Slavinskaya, Dr., Professor, Institute of Technologies of Burning at the German Space Agency, Germany.
- A. Buranov, Dr., Company “Kok technologies Inc.”, Canada.
- M. Farakhov, Dr.Eng.Sc., Professor, LLC Engineering – promotional center “Inzhechim”, Kazan, Russian Federation.
- P. Prokopovich, PhD, Professor, Cardiff University, United Kingdom
- M.S. Satayev, Dr.Eng.Sc., Professor, M. Auezov SKSU, Kazakhstan
- B. Zh. Mutaliyeva, Can.Eng.Sc., Ph.D., Associate Professor, M. Auezov SKSU, Kazakhstan
- A.A. Mirzayev, Can.Eng.Sc., Ph.D., Associate Professor, M. Auezov SKSU, Kazakhstan
6. Intellectual potential
- A. Desyatov, Federal State Unitary Enterprise “Keldysh Centre”, Moscow, Russian Federation.
- N. Kurakova, Dr. Biological Sciences, prof., Russian Academy of Medical Sciences, Director, Moscow, Russian Federation.
- A.M. Sarsenbi, Dr. Ph-math. Sc., M. Auezov SKSU, Kazakhstan
- A.M .Esirkepova, Dr. Econ. Sc., Professor, M. Auezov SKSU, Kazakhstan
- M. K. Seidakhmetov, Dr. Econ. Sc., Associate Professor, M. Auezov SKSU, Kazakhstan
- K. K. Nurashova, Dr. Econ. Sc., Professor, M. Auezov SKSU, Kazakhstan
Stages of accepting an article for publication
1
2
Technical verification
Automatic article verification takes 48 hours.
In case of refusal, we will send it to You for revision.
In case of refusal, we will send it to You for revision.
3
Review process
If the article is written in English, the quality of the English language is checked within
24 hours.
If the article isnt written in English,
we review it within 10 days.
24 hours.
If the article isnt written in English,
we review it within 10 days.
4
Approval and payment
After passing all the stages of verification when your article is approved, you make a payment according to the rates.
Stages of accepting an article for publication
1
2
Technical verification
Automatic article verification takes 48 hours.
In case of refusal, we will send it to You for revision.
In case of refusal, we will send it to You for revision.
3
Review process
If the article is written in English, the quality of the English language is checked within
24 hours.
If the article isnt written in English,
we review it within 10 days.
24 hours.
If the article isnt written in English,
we review it within 10 days.
4
Approval and payment
After passing all the stages of verification when your article is approved, you make a payment according to the rates.
Paper requirements and submission
Manuscripts that have not previously been published in other publications, have a scientific novelty, correspond to the conference topic, and are of theoretical and practical significance are accepted for consideration.
All works are blindly reviewed and
checked in the anti-plagiarism system.
The minimum originality of the article in English is 80%.
Official language of the conference: English
You can submit an article in Russian for consideration, provided that you order a translation from the conference organizer on a paid basis.
If you submit an article in English, it is checked for translation quality before reviewing it native speakers
The article must be attached when filling out the registration form.
All works are blindly reviewed and
checked in the anti-plagiarism system.
The minimum originality of the article in English is 80%.
Official language of the conference: English
You can submit an article in Russian for consideration, provided that you order a translation from the conference organizer on a paid basis.
If you submit an article in English, it is checked for translation quality before reviewing it native speakers
The article must be attached when filling out the registration form.
| Registration |
Introduction;
Methods;
Results;
Discussion;
Conclusion.
Methods;
Results;
Discussion;
Conclusion.
Title;
Author Data: full name, affilation (job title), city, country and e-mail;
Abstract (from 100 to 300 words);
References (at least 10 links, including links to publications indexed
in Web of Science and / or Scopus).
Author Data: full name, affilation (job title), city, country and e-mail;
Abstract (from 100 to 300 words);
References (at least 10 links, including links to publications indexed
in Web of Science and / or Scopus).
Materials for publication should contain the following information:
The structure of the article
must comply with IMRAD
must comply with IMRAD
Please note, that the number of authors must not be more than three, he number of articles that the author may publish in one issue must not be more than two
The volume of the article should not exceed 20 000 - 30 000 characters with spaces
(including the title, full name of the authors, the text of the article and references).
The volume of the article should not exceed 20 000 - 30 000 characters with spaces
(including the title, full name of the authors, the text of the article and references).
Please note, that the number of authors must not be more than three, he number of articles that the author may publish in one issue must not be more than two
The volume of the article should not exceed 20 000 - 30 000 characters with spaces
(including the title, full name of the authors, the text of the article and references).
The volume of the article should not exceed 20 000 - 30 000 characters with spaces
(including the title, full name of the authors, the text of the article and references).
Papers by template
To participate in the ICITE 2021 conference,
you must fill out the registration form and attach an article designed according
tothe template.
You can also order a template for your article from us, according to our rates
you must fill out the registration form and attach an article designed according
tothe template.
You can also order a template for your article from us, according to our rates
Papers by template
To participate in the ICITE 2021 conference,
you must fill out the registration form and attach an article designed according
tothe template.
You can also order a template for your article from us, according to our rates
you must fill out the registration form and attach an article designed according
tothe template.
You can also order a template for your article from us, according to our rates
Conditions and cost of participation in the conference
(Application acceptance is over)
(Application acceptance is over)
Acceptance of applications under these condition is over
Acceptance of applications under these condition is over
Acceptance of applications under these condition is over
Early registration
Arrangement fee:
Arrangement fee:
150€
- Dates of sending articles:
- 15.06.2021 – 31.07.2021
- Additional information:
- The cost of translation into English:⠀⠀90€
- Design of the article on the template:⠀20€
Standart registration
Arrangement fee:
Arrangement fee:
180€
- Dates of sending articles:
- 1.08.2021 – 30.09.2021
- Additional information:
- The cost of translation into English: ⠀100€
- Design of the article on the template: 25€
Late registration
Arrangement fee:
Arrangement fee:
300€
- Dates of sending articles:
- 01.10.2021 – 30.10.2021
- Additional information:
- The cost of translation into English:⠀110€
- Design of the article on the template:⠀30€
Conditions and cost of participation in the conference
(Application acceptance is over)
(Application acceptance is over)
Acceptance of applications is over
Early registration
Arrangement fee:
Early registration
Arrangement fee:
150€
- Dates of sending articles:
- 15.06.2021 – 31.07.2021
- Additional information:
- The cost of translation into English:⠀⠀90€
- Design of the article on the template:⠀20€
Acceptance of applications is over
Standart registration
Arrangement fee:
Standart registration
Arrangement fee:
180€
- Dates of sending articles:
- 1.08.2021 – 30.09.2021
- Additional information:
- The cost of translation into English: ⠀100€
- Design of the article on the template: 25€
Acceptance of applications is over
Late registration
Arrangement fee:
Late registration
Arrangement fee:
300€
- Dates of sending articles:
- 01.10.2021 – 30.10.2021
- Additional information:
- The cost of translation into English:⠀110€
- Design of the article on the template:⠀30€
The registration fee is paid only after the publication is accepted into the conference proceedings,
but no later than July 31, 2021 for "Early Registration",
no later than September 30, 2021 for "Standard Registration",
and no later than October 30, 2021 for "Late Registration".
but no later than July 31, 2021 for "Early Registration",
no later than September 30, 2021 for "Standard Registration",
and no later than October 30, 2021 for "Late Registration".
You can use any payment system that is convenient for you.
Please note that if the registration fee is not received within the established time limit
Your report will not be published.
Your report will not be published.
Registration form
Organizers
South Kazakhstan State University named after M. Auezov,
Shymkent, Kazakhstan
Institute of Digital Economics and Law
Organizers
South Kazakhstan State University named after M. Auezov,
Shymkent, Kazakhstan
Institute of Digital Economics and Law
Contact us:
E-mail:
icite2021@ide-rus.ru
Phone:
+7 (343) 382-555-1
WhatsApp, Telegram
+7 (999) 340-555-1
Contact us:
E-mail:
icite2021@ide-rus.ru
Phone:
+7 (343) 382-555-1
WhatsApp, Telegram
+7 (999) 340-555-1